Specific voltage and fuse labels
24 products
Wholesale Customize Labels's specific voltage and fuse labels use the latest best practice ANSI and ISO designs to help create safety systems for electrical hazard prevention.
H6010-SPWH
Warning Hazardous Voltage Label
6020-C3CH
Caution For Continued Protection Label
WCDL-EV
Custom Voltage Label
H6010-236WH
Warning For Continued Protection Label
H6010-703WH
Warning 120 Vac Label
H6130-B81WH
Warning Use Correct Fuse Label
H6020-E4WH
Warning For The Continued Label
IEC5016a-
Fuse Label
IS6130-
Fuse (Writable) Label
5025/6020-F63WH
Warning To Reduce the Risk Label
H6010-177WH
Warning 115 Volts AC Label
H6010-H65WH
Warning Critical Fuse Sizing Label
H6010-DY6WH
Warning 240 Volts Label
H6010-C79DH
Danger High Voltage 115 Vac Label
H6010-4MWH
Warning 110-120 VAC Label
H6010-2LWH
Warning Hazardous Voltage Label
V575-
575 Volts Label
H6010-M91WH
Warning Hazardous Voltage Label
H6010-C92WH
Warning 120V Input Label
H6010-SSWH
Warning Hazardous Voltage Label
IS6184-
Fuse (Writable) Label
H6184-433WH
Warning Fire Hazard Label
H6130-433WH
Warning Fire Hazard Label
H6010-V33WH
Warning 220 380 Vac Label
Nothing matches those filters. orask us for a custom version.
About specific voltage and fuse labels
Most non-battery-operated products operate from an external voltage source. If the voltage source is higher or lower than the product operating voltage, the product could overheat and damage the product safeguards. This is why the operating voltage must be marked on your products so that the connection is to a voltage source within the product operating voltage range. A product’s electrical voltage marking can be a nominal voltage or a range of voltages. These voltage labels can be used on circuit breakers and boxes, electrical panels, switches, and conduits.
Often paired with specified voltage markings, fuse labels and stickers are important for ensuring electrical safety in high voltage situations. Fuses are safeguards, usually against electrically-caused fire, but sometimes against electrically-caused injury. To prevent fire or electrically-caused injury, it’s imperative that the fuse is always replaced by one with the same set of ratings.
If a replaceable fuse is used in the product, whether user-replaceable or serviceman-replaceable, information as to an equivalent replacement fuse is required to be marked near the fuse. Usually, the marking would include at least voltage and current ratings. In some cases, the fuse interrupt-current rating may be appropriate. If the product uses an operating voltage setting device, the device should indicate the voltage for which the product is set. The act of changing the voltage setting should also change the indication of the voltage for which the equipment is set. Our electrical safety fuse labels are ANSI and ISO compliant and help to reduce fuse related electrical hazards.
Finding the voltage and fuse label that meets your specific requirements is easy, as we offer symbol only, text only, multi-symbol and text, and symbol and text formats, as well as durable indoor/outdoor options. Browse the labels here in our catalog, or create your own to include any additional requirements you may have.
Unsure about the right label for your needs? A Wholesale Customize Labels label assessment can help.
